The element's family geometry is set to not be visible in the view or is being controlled with a visibility parameter.
The visibility of levels and grids can be affected by the datum extents ( About Datum Visibility in Project Views ) or controlled with scope boxes ( Control Visibility of Datums Using Scope Boxes). Ensure the link is visible in the view. It turns out, this is completely by design. If the element is part of a linked file, do the following: Revit does a great job of cutting through walls and floors and casework and ducts and more, but some categories you can never seem to see a cut view of. Verify that the element is not hidden by a masking region or a filled region. See Override Individual Lines in an Element. Confirm that the edges of the element were not overridden using the Linework tool. Basically we get all generic model instances on the active view. #Revit generic model invisible in view software
See Control Visibility of Mass Instances. The resource for software developers working with Revit, Navisworks and other AEC and. The visibility of masses can be controlled by the Show Mass setting of the view.In the case of an annotation element, the entire element must be within the annotation crop region to be visible. Turn on the visibility of the crop region and confirm that the element is within the extents of the crop region. The element may be outside of the crop region of the view.It may cause some elements not to display as expected.
In the view properties, check the Discipline parameter. Note: Verify that instances of demolished elements are phase states and not individual phases. Simple entry gate created in generic model with HEIGHT and WIDTH as. 
Phases and phase filters both impact the displays of objects within views. Simply load or insert 3D content directly into your Revit model or CAD drawing.
If your project uses phases, in the view properties, for Phase Filter, select None. If the project is workshared, confirm that the workset of the element is visible in all views. See Check the Design Option Settings for a View. If the element is part of a design option, check the visibility settings of design options in the view. See Change the Clip Plane in an Elevation View and About Section View Width and Depth. In a section or elevation view, verify the clip plane depth. In a plan view, verify that the View Range settings are appropriate. See Exclude Elements from a Group Instance.Ĭheck view properties and related settings Check to see if the element is part of a group but has been excluded. Groups may contain elements that have been excluded (not visible). See Change the Visibility of a Workset in a View. If the project is workshared, click the Worksets tab and turn off any applied filters. The Revit API exposes around 1700 classes, 50 interfaces and 500 enumerations which cover almost every aspect and function of the application. In the ribbon, click the View tab > Graphics panel > Visibility/Graphics. Note: If the DWG is not visible in the view then reopen the DWG in AutoCAD, ensure that all layers are visible. See Controlling Visibility and Graphic Display of Elements Using Filters. Make sure there is no view templates used that could grey out the option for turning the site points on. The DWG will be linked into the Revit file. Click the Filter tab and turn off any applied filters. See About the Visibility and Graphic Display Dialog. Verify that the visibility of the object's category and subcategory are enabled. In the Visibility/Graphic Overrides dialog, try the following:. See Override Graphic Display of Element Categories. Model categories can have detail level set independent of the view's detail level. Verify the detail level for the category of the element. Check settings for the element or its category ) When you extend your content into the title bar area, the system by default retains the entire title bar area except for the caption buttons as the drag region.If you are still unable to locate the missing object, proceed through the following checklist to determine the source of the issue.
0 kommentar(er)
